Furuno 1823C Operator's Manual page 26

1. OPERATIONAL OVERVIEW
1.5.2 Selecting a display
1. Press the [DISP] key to show the display selection window. The icons of
modes not available are shaded. HOTPAGE 1-HOTPAGE 6 are
user-arrangeable displays called "hot pages," which you can configure as you
like. For further details, see the paragraph "5.6 Hot Page Setup."
Selected
item
Note: "WX FAX" is available only when the facsimile receiver FAX-30 is
connected. If "AUX SOURCE IS DISCONNECTED. PUSH ENT KNOB TO
EXIT." appears, press the [ENTER] knob and select other item.
2. Rotate the [ENTER] knob to select a basic display screen or a hot page
screen.
3. Push the [ENTER] knob.
4. If you selected a basic display screen, a group of appropriate combination
displays appear. In the example below, the radar combination screens are
shown. When WX FAX is selected at step 2, a combination display does not
appear.
5. Rotate the [ENTER] knob to select display desired.
6. Push the [ENTER] knob to finish.
1-10
RADAR PLOTTER SOUNDER NAV DATA OVERLAY EXT VIDEO
HOTPAGE 1 HOTPAGE 2 HOTPAGE 3
· TURN KNOB TO SELECT MODE
AND PUSH KNOB TO ENTER.
· PUSH ANY SOFT KEY TO
SELECT IMAGE SOURCE.
Display screen selection window
PUSH ENTER KNOB.
Radar combination screen selection window
HOTPAGE 4 HOTPAGE 5 HOTPAGE 6
Basic display
WX FAX
screens
Hot pages