Furuno ETR-30N Operator's Manual page 26

Note: The very first time the system is powered you are asked if you want to start the
simulation mode, which provides simulated operation of the equipment. Press the
[CLEAR] key to start normal operation to set up the transducer. For further details
about the simulation mode, see your NavNet series operator's manual.
6. Press the NETWORK SETUP soft key.
7. Confirm that the "SOUNDER SOURCE" is SOUNDER.
START
SIMULATION MODE?
YES ... PUSH ENTER KNOB
NO ... PUSH CLEAR KEY
TO SKIP.
Simulation mode window
IP ADDRESS 172.031.092.001
HOST NAME RADAR________
RADAR SOURCE RADAR________
CHART SOURCE ______________
______________
______________
SOUNDER SOURCE SOUNDER
AUX* WFAX
SUBNET MASK 255.255.000.000
GATEWAY ADDRESS 000.000.000.000
OFFSET PORT NUMBER
* = Model 1833C only.
Network setup menu
8
NETWORK
SETUP
EDIT
10000
RETURN