Download Print this page

ProForm 980 CS PFTL99908.2 User Manual page 4

Advertisement

20. Neverleavethe treadmillunattended whileit
24.
is running.Alwaysremovethe key,unplug
the powercord,andswitchthe reset/offcir-
cuit breaker to the off positionwhenthe
25.
treadmillis not in use.(Seethe drawingon
page5
for the location of the circuit breaker.)
21. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADMILL on page 24.)
You must be able to safely lift 45 Ibs. (20 kg)
to raise, lower, or move the treadmill.
22. When folding
or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
26.
Inspect and properly tighten all parts of the
treadmill regularly.
DANG ER:
Always unplug the power
cord immediately after use, before cleaning the
treadmill, and before performing the mainte-
nance and adjustment procedures described in
this manual. Never remove the motor hood un-
less instructed to do so by an authorized ser-
vice representative. Servicing other than the
procedures in this manual should be performed
by an authorized service representative only.
This treadmill is intended for in-home use
only. Do not use this treadmill in a commer-
cial, rental, or institutional setting.
23. Never insert any object into any opening on
the treadmill.
SAVE THESE INSTRUCTIONS
4

Advertisement

loading

This manual is also suitable for:

980 cs