Advertisement
Quick Links
With Universal Dock for iPod ®
www.proform.com
Model No. PFTL99908.2
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts are
damaged or missing, DO NOT CON-
TACT THE STORE; please contact
Customer
Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-888-533-1333
Mon.-Fri. 6 a.m.-6 p.m. MT
Sat. 8 a.m.-4 p.m. MT
ON THE WEB:
www.proformservice.com
USER'S MANUAL
Advertisement
Related Manuals for ProForm 980 CS PFTL99908.2
Summary of Contents for ProForm 980 CS PFTL99908.2
- Page 1 With Universal Dock for iPod ® www.proform.com Model No. PFTL99908.2 USER'S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CON- TACT THE STORE;...
- Page 2 -Always wear operating treadmill. PROFORM is a registered trademark of ICON IP, Inc. iPod ® is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
- Page 3 12. To purchase a surge suppressor, see informed of all warnings and precautions. your local PROFORM dealer or call the tele- phone number on the front cover of this man- Use the treadmill only as described.
- Page 4 20. Neverleavethe treadmillunattended whileit Inspect and properly tighten all parts of the is running.Alwaysremovethe key,unplug treadmill regularly. the powercord,andswitchthe reset/offcir- DANG ER: cuit breaker to the off positionwhenthe Always unplug the power treadmillis not in use.(Seethe drawingon cord immediately after use, before cleaning the page5 for the location of the circuit breaker.) treadmill, and before performing the mainte-...
- Page 5 BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM ® ing this manual, please see the front cover of this man- 980 CS treadmill with Universal Dock for iPod ®.The ual. To help us assist you, note the product model 980 CS treadmill with Universal Dock for iPod offers an number and serial number before contacting us.
- Page 6 ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
- Page 7 Make sure that the power cord is unplugged. With the help of a second person, carefully tip Hole the treadmill onto its left side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Cut the ties securing the Upright Wire (38) to the Base (83).
- Page 8 Hold a Bolt Spacer (77) inside the lower end of the Right Upright (78). Next, insert a 3/8" x 4 1/2" Bolt (6) with a 3/8" Star Washer (9) into the Right Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (77), 3/8" x 4 1/2"...
- Page 9 Settheconsole assembly f acedownona soft surface to avoid scratching t heconsole assem- Console bly. Wire Hole HoldtheRightHandrail (95)neartheconsole assembly. Next,insert t heconsole wireintothe largeholeintheRightHandrail andoutofthe topasshown. I f necessary, useneedlenose p li- ersto pulltheconsole wireout. Attach the RightHandrail (95)andthe Left Console Handrail (notshown) w ithfour#8x 3/4"Screws Assembl,...
- Page 10 10. Attach the console assembly with six 5/16" x 1 1/2" Bolts (7) and six 5/16" Star Washers (10) (only three are shown). Console See steps 4 and 6. Tighten the 3/8" x 4 1/2" Assembly_ Bolts (6). 11. Raise the Frame (56) to the position shown. Have a second person hold the Frame until this step is completed.
- Page 11 12. Press the Left Accessory Tray (99) and the Right Accessory Tray (97) into the console as- sembly. Console Assembl' 13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic.
- Page 12 (see drawing 1 at Outlet Box the right). To purchase a surge suppressor, see Adapter your local PROFORM dealer or call the telephone Surge Suppressor number on the front cover of this manual and order part number 146148, or see your local electronics store.
- Page 13 CONSOLEDIAGRAM iNCLINE SPEED START VOLUME FEATURES OFTHECONSOLE to accept iFit interactive workout cards containing workouts designed to help you achieve specific fitness The revolutionary treadmill console offers a selection goals. For example, lose unwanted pounds with the 8- of features designed to make your workouts more ef- week Weight Loss workout, or train for a long-distance run with the Marathon workout, iFit workouts automati- fective and enjoyable.
- Page 14 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to Insert the key into the console. cold temperatures, allow it to warm to room tem- See HOW TO TURN ON THE POWER at the left. perature before turning on the power.
- Page 15 Follow your progress with the display. Measure your heart rate if desired. The console offers several display options. The dis- If you hold the handgrip pulse sensor and wear the play option you select will determine which workout optional chest pulse sensor at the same time, the information is shown.
- Page 16 HOW TO USE A WEIGHT LOSS WORKOUT OR A sents the current segment of the program. The PERFORMANCE WORKOUT height of the flashing segment indicates the speed setting for the current segment. At the end of each Insert the key into the console. segment, a series of tones will sound and the next segment of the profile will begin to flash and the See HOW TO TURN ON THE POWER on page...
- Page 17 HOW TO USE AN IFIT CARD Press the Start button to start the workout. To purchase iFit cards at any time, call the telephone A moment after you press the Start button, the number on the front cover of this manual or go to treadmill will automatically adjust to the first speed www.iFit.com, iFit cards are also available at select and incline settings of the workout.
- Page 18 HOW TO USE THE IFIT COMPETITION TRAINING select a profile of the incline settings of the race CENTER (see page 20). Insert the key into the console. After a few moments, READY, SET, GO will ap- pear in the display and then the race will begin. See HOW TO TURN ON THE POWER on page Hold the handrails and begin walking.
- Page 19 • The speed of the walking belt. Note: Press the • The bank, or amount, of energy your opponents Enter button to see your pace in minutes per kilo- have left. As the amount of energy in a bank de- meter or minutes per mile.
- Page 20 HOW TO PERSONALIZE CONSOLE SETTINGS workout. If you change the maximum incline set- ting, the intensity of the entire workout will change. Insert the key into the console. Choose the AUTO incline mode to use preset in- cline settings, the FLAT incline mode to use no in- See HOW TO TURN ON THE POWER on page cline settings, or the CHOICE incline mode to choose a profile of the incline settings at the begin-...
- Page 21 HOW TO VIEW THE FITNESS JOURNAL change the year. Note: The fitness journal can store information for 7 different years. You can only Insert the key into the console. view a year for which information has been recorded. See HOW TO TURN ON THE POWER on page View exercise information by month.
- Page 22 THE INFORMATION MODE HOW TO USE THE STEREO SOUND SYSTEM The console features an information mode that allows This product has been designed specifically to work you to select a unit of measurement for the console with iPod and has been certified by the developer to and turn on or turn off the display demo mode.
- Page 23 THE OPTIONAL CHEST PULSE SENSOR HOW TO ADJUST THE CUSHIONING SYSTEM An optional chest pulse sensor offers hands-free oper- Remove the key from the console and unplug the ation as it tracks your heart rate during your workouts. power cord. The treadmill features a cushioning sys- To purchase the optional chest pulse sensor,...
- Page 24 HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord.
- Page 25 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. It may be neces- sary to push the frame forward as you pull the knob to the left.
- Page 26 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
- Page 27 Remove the three #8 x 3/4" Screws (1) and care- fully pivot the Hood (61) off. Locate the Reed Switch (71) and the Magnet (50) on the left side of the Pulley (51). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and 1/8 in.
- Page 28 PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left rear roller bolt clockwise 1/2 of a turn;...
- Page 29 EXERCISE GUIDELINES Burning Fat--To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy.
- Page 30 PART LIST--Model No. PFTL99908.2 RoeogA To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. Description Key No. Qty. Description #8 x 3/4" Screw Front Roller/Pulley #8 x 1" Tek Screw 15 1/2"...
- Page 31 Key No. Qty. Description Key No. Qty. Description Console Ground Wire Latch Endcap #8 x 2" Screw 4" Black Wire, M/F 5/32" Hex Key 4" White Wire, M/F Lift Motor Spacer User's Manual Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual.
- Page 32 >. "0 "1"1 34 80 3>...
- Page 33 EXPLODED DRAWING B--Model No. PFTL99908.2 RoeogA...
- Page 34 EXPLODED DRAWING C--Model No. PFTL99908.2 RoeogA 21-4%1_...
- Page 35 EXPLODED DRAWING D--Model No. PFTL99908.2 R0609A...
- Page 36 ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...