NEC LE2200 User Manual page 108

5-10
ACTION/MESSAGE
If POST Beeps Before
Video Appears
If Monitor Displays Error
To Enter Setup
POST Beeps
Enter BOOT Diskette
Problem Solving
Table 5-1. POST Keys and Errors
Initialization failed before video initialized. Most beep code errors are
fatal; initialization cannot continue. Refer to the section BIOS User's
Information in this chapter.
Note error; press F1 to continue boot or F2 to enter Setup. Refer to
the section BIOS User's Information in this chapter.
Use Setup utility before using Resource Configuration Utility (RCU)
to configure entire system. Setup changes specific options, then
writes to CMOS, NVRAM. Press F2 during initialization to run Setup.
If you do not press F2, the boot process continues.
Initialization has completed.
If prompted, insert the boot diskette.
DESCRIPTION