Apportioning The Memory - Furuno BACK GP-80 Operator's Manual

2.10 Apportioning the
Memory
The memory holds 2,000 points of track and
marks and may be apportioned as you like.
The default memory setting stores 1,000
points each of track and marks.
CAUTION
All data are erased whenever the memory
apportion setting is changed, even when the
previous value is re-entered.
To store 1,500 points of track and 500 marks,
for example, do the following:
1) Press the [MENU ESC] key.
2) Press [9] to display the SYSTEM SET-
TINGS menu.
SYSTEM SETTINGS
1. PLOTTER SETUP
2. UNIT SETUP
2. UNIT SETUP
2. UNIT SETUP
3. DATA 1, 3 OUTPUT SETUP
4. DATA 2 OUTPUT SETUP
5. DATA 4 I/O SETUP
6. GPS SETUP
7. DGPS SETUP
8. LOP SETUP
9. CLEAR MEMORY
ENT: Enter
Figure 2-8 SYSTEM SETTNGS menu
MENU: Escape
3) Press [1] to display the PLOTTER SETUP
menu.
PLOTTER SETUP
Memory Apportion
Bearing Ref.
Mag Variation
Calculation
User defined #1
User defined #2
User defined #3
User defined #4
ENT: Enter
Figure 2-9 PLOTTER SETUP menu
4) Press or to select Memory Appor-
tion.
5) Enter amount of track to store, in four dig-
its. To store 1,500 track points, for ex-
ample, press [1] [5] [0] [0].
6) Press the [NU/CU ENT] key, or
You are asked if it is all right to erase all
data.
Setting erases all data!
Are you sure to change ?
ENT: Yes
Figure 2-10
7) Press the [NU/CU ENT] key.
8) Press the [MENU ESC] key.
Trk = 1000 / 2000Pt
Mag
True
Auto
Man
(07° W) (00° E)
R.L
G.C
RNG
SPD
BRG
CSE
MENU: Escape
or
MENU: No
2 – 5
.