Editing Waypoints - Furuno BACK GP-80 Operator's Manual

Edit = Waypoint : 001
_ _°
_ _._ _ _' N _ _ _°_ _._ _ _' W
Mark :
__
Cmnt :
: Cursor
ENT: Enter
Figure 4-11
6) Enter latitude and longitude. To enter
34 12.345' N 135 23.456' E, for example,
press;
([ ]) [3] [4] [1] [2] [3] [4] [5]
([ ]) [1] [3] [5] [2] [3] [4] [5] [6]
To change N to S or E to W, press [
7) Press .
8) Press t or s to select mark.
9) Press the [NU/CU ENT] key.
10) Enter comment.
11) Press the [NU/CU ENT] key twice.
The waypoint list reappears. Waypoint
position and date and time the waypoint
was entered appear on the list.
12) To enter another waypoint through the
waypoint list, return to step 4.
13) Press the [MENU ESC] key to finish.
4 – 4
: Column
MENU: Escape
].

4.2 Editing Waypoints

1) Press [WPT RTE] and [4].
2) Press or to select waypoint to edit.
3) Press s.
4) Edit the contents of the waypoint.
5) Press the [NU/CU ENT] key. The mes-
sage shown in Figure 4-12 appears if the
waypoint is currently selected as destina-
tion, is part of a route, or is in the route
currently selected as destination.
1st line
Are you sure to erase ?
ENT: Yes
This wpt is GOTO
This wpt is in registered route
This wpt is in selected route
Figure 4-12
6) Press the [NU/CU ENT] key.
The waypoint and its data are deleted.
Enter new data, referring to "4.1 Regis-
tering Waypoints".
7) Press the [MENU ESC] key.
MENU: No