Light Bulb - Kenmore 911.36665 Use & Care Manual

CAREAND CLEANING
Removable P arts
CLEANING MATERIALS
* Dishwashing detergent
° Warm water
° Soft cloth
Match Flat
in Stem
Shaft
TO REMOVE
1. Be sure the control knob is in the
off position
2. Pull straight off the stem
Using a piece of string can make
removing the knob easier, Sfip the
string under and around the knob,
Then pull straight out,
TO CLEAN
Wash the knob thoroughly with soapy
water. Dry completely with a soft cloth,
DO NOT let the knob soak
TO REPLACE
1.
1
3.
Check the back of the knob, The
molded flat of the knob is designed
to fit perfectly onto the knob stem
flat.,
Align the molded flat to the flat on
the knob stem
Push the knob back as far as it
will go.
_ AUTION,"
Disconnect electrical
power to the oven at
the main circuit
breaker or fuse box before
attempting to replace the oven
light bulb. Do not touch a hot
light bulb with wet hands or a
wet cloth. Wait until the bulb
has cooled and use a dry cloth.
Gasket
Gas Retainer
Glass Cover \
Screw
TO REPLACE
1. Remove the three screws and lift
off the glass retainer, glass cover
and gasket
2. Replace the bulb with a 40-watt
appliance bulb. An appliance bulb
is smaller than a standard 40-watt
household bulb
3. Replace the gasket, glass cover
and glass retainer Tighten screws
securely,
25