Glass; Oven Light Bulb - Kenmore 911.93551 Owner's Manual

CARE ANDCLEANING
RemovableParts
CLEANING MATERIALS
• Dishwashing detergent
° Warm water
• Soft cloth
Molded Rib
GI
r
_ AUTION: Disconnect
electrical power to
the oven at the main
circuit breaker or fuse box
before attempting to
replace the oven light bulb.
Do not touch a hot light
bulb with wet hands or a
wet cloth. Wait until the
bulb has cooled and use a
dry cloth.
Live
Glass
Retainer
Spring Clip
TO REMOVE
1. Be sure the control knob is in the
OFF position.
2. Pull straight off the stem Using a
piece of string can make removing
the knob easier, Slip the string
under and around the knob,
pulling straight out.
TO CLEAN
Wash the knob thoroughly with soapy
water, Dry completely with a soft c!oth_
DO NOT let the knob soak,
TO REPLACE
1. Check the back of the knob.
2. The molded rib of the knob is
designed to fit perfectly onto the
knob stem
3. Align the molded rib to the clear
groove in the knob stem Push the
knob back as far as it will go.
Bulb
Glass j
Cover
TO REMOVE THECOVER
1. Disconnect electrical power to the
oven at the main circuit breaker or
fuse box
2. Grasp the glass cover and turn ¼
turn counterclockwise until the
tabs of the glass cover clear the
grooves of the glass retainer
REPLACE THE LIGHT BULB
Unscrew the light bulb and replace it
with a 40-watt appliance bulb,
TO REPLACE COVER
1. Place the tabs of the glass cover
into the grooves of the glass
retainer,
2. Turn the glass cover Y4turn in the
clockwise direction
3. Reconnect the electrical power to
the oven_
For improved lighting inside the oven,
clean the glass cover frequently
using a wet cloth. Caution: This
should only be done when the
oven is completely cool,
19