Setting Spoo! Pins; Presser Foot Lifter; Thread C; Accessory Kit - Kenmore 385.12618 Owner's Manual

Setting Spool Pins r -_
0 Spool pin
The spoo! pins are used for holding the spools of
thread when feeding thread to the machine.
To use, pull up the spool pins Push down for storage,
Presser Foot Lifter
(_ Presser foot lifter
(_) Normal up position
(_) Highest position
The presser foot lifter raises and lowers your presser foot.
You can raise it about 0.6 cm (1t4") higher than the nor-
mal up position for easy removal of the presser foot or to
help you place heavy fabric under the foot.
Thread Cutter
0 Thread cutter
You do not need a pair of scissors to cut threads after
sewing, Just use the built-in thread cutter
r"
{
"3
J
Accessory Kit
Standard accessories are located inside the extention
table_
Standard accessories are in plastic bag
%.
f
J