Wiring - Furuno RD-30 Installation Manual

1.2

Wiring

The figure below shows where to connect cables on the rear of the display
unit.
Note: The fuse holder contains a spring which fixes the fuse. To prevent
detachment of the spring, which would cause loss of power, tie the
line as shown in Figure 1-3.
GPS
RECEIVER
POWER
1A FUSE
(12-24 VDC)
(+ Line)
- +
Black Red
CAUTION
Ground the equipment to
prevent mutual interference.
Figure 1-2 Wiring
Fuse holder
Figure 1-3 How to fix spring in fuse holder
DISPLAY
UNIT
DISPLAY
UNIT
Ground
+ line (red)
Tie here.
3