Toshiba B-EX4 SERIES Maintenance Manual page 25

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
13) Connect the four harnesses of the cutter unit to CN8, CN10, CN11 and CN12 on the cutter drive
unit.
Cutter Unit
14) Fit the two tabs of the cutter drive unit into the notches, and then fix the cutter unit with the three
SM-4x8 screws.
Notch
SM-4 x 8 Screw
Print Head Block
Cutter Drive Unit
CN8
4- 10
4.2 ROTARY CUTTER (B-EX204-R-QM-R)
CN12
CN10
CN11
Cutter Unit
SM-4 x 8 Screw
Notch
EO18-33027