Toshiba B-EX4 SERIES Maintenance Manual page 23

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33027
4.2 ROTARY CUTTER (B-EX204-R-QM-R)
5) Connect the 9-pin connector of the harness ass'y to CN7 on the cutter driver unit, respectively.
Harness Ass'y
CN7 (9 pins)
6) Fit the bush to the harness ass'y in the orientation as shown below.
Harness Ass'y
7) Insert the harness ass'y into the hole in the main frame. Fit the bush into the hole.
Main Frame
Hole
Harness Ass'y
4- 8