Toshiba B-EX4 SERIES Maintenance Manual page 21

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
NOTE: When attaching the B-8204-QM cutter module, replace the original cutter paper guide C with
the enclosed B-SX cutter paper guide C using the following procedure.
CAUTION!
Do not hold the cutter paper guides when attaching the Cutter Unit to the printer. Doing so may
deform the cutter paper guides, causing a paper jam.
DO NOT!
(1) Remove the two M-4x6 Set Screws from the cutter unit to detach the cutter paper guide C.
Cutter Paper Guide C
(2) Secure the B-SX cutter paper guide C with the M-4x6 set screws while pushing it upward.
B-SX Cutter
Paper Guide C
M-4x6
M-4x6
4- 6
4.2 ROTARY CUTTER (B-EX204-R-QM-R)
Cutter Paper Guide
EO18-33027