Corded Buttonhole - Kenmore 385.19106 Owner's Manual

Corded Buttonhole
Machine setting
_i_ Stitch selector: _] _ [_
_2_ Thread tension: 1 - 5
_3_ Presser foot: Sliding buttonhole foot
®
f
J
\
[lJ With the buttonhole foot raised, hook the filler cord on
the spur at the back of the foot.
Bring the ends toward you under the foot, clearing the
front end.
Hook the filler cord into the forks on the front of the foot
to hold them tight.
_i_ Spur
_2_Forks
I2/ Draw both of needle and bobbin thread to the left.
Move the slider toward you so that the top mark _4_ on
the slider meets the start mark _3_.
_3_ Start mark
_4_ Top mark
_5_Needle thread
_6_Bobbin thread
Lower the needle into the fabric at the starting point
and lower the foot.
Depress the foot control gently and sew the buttonhole
over the cord.
The sewing sequence is the same as the 4-step
buttonhole.
[13J Pull the left end of the filler cord to tighten it and cut the
excess tails.
To cut the buttonhole opening, refer to the instructions
on page 48.
%
/
/
®
%
®
50