Care Ofyour Machine; Replacing The Light Bulb; Cleaning The Hook Race And Feed Dogs - Kenmore 385.19106 Owner's Manual

SECTION VII. CARE OF YOUR MACHINE
NOTE:
* Unplug the machine.
* Do not dismantle the machine other than as explained
in this section.
* Do not store the machine in a high-humidity area, near
a heat radiator, or in direct sunlight.
* Clean the outside of the machine with a soft cloth and
mild soap.
Replacing the Light Bulb
CAUTION:
As the light bulb could be HOT, protect your fingers when
you handle it.
Remove the screw. Remove the face plate.
_i_ Screw
_2_Face plate
Push and turn the bulb counterclockwise to remove it.
Push and turn the bulb clockwise to replace it.
_3_Light bulb
Cleaning the Hook Race and Feed Dogs
Eli Remove the presser foot and needle. Remove screw
on the needle plate with the screwdriver.
Remove the needle plate and take out the bobbin.
_i_ Screw
[2J Lift up the bobbin holder and remove it.
_2_Bobbin holder
[3] Brush out dust and lint. Wipe the bobbin holder with a
soft, dry cloth.
[i_i]Clean the feed dogs and hook area with a brush.
_3_Feed dogs
[i_1Wipe the hook race with a soft, dry cloth.
_4_Hook race
NOTE:
You may also use a vacuum cleaner.
®
%
%
%
%
/
52