Corded Buttonhole - Kenmore 384.18024000 Owner's Manual

• Corded Buttonhole
Use the same procedure as automatic buttonhole.
* Set the stitch width to match the thickness of the cord
used.
With the buttonhole foot raised, hook the filler cord on the
spur at the back of the buttonhole foot.
Bring the ends toward you under the buttonhole foot,
clearing the front end.
Hook the filler cord into the forks on the front of the
automatic buttonhole foot R to hold them tight.
Lower the needle into the garment where the buttonhole will
start and lower the foot.
(_ Spur
Depress the foot control gently and sew the buttonhole. Each
side of the buttonhole and the bartacks will be sewn over the
cord.
Remove the fabric from the machine and cut the sewing
threads only.
(_ Needle thread
Bobbin thread
Pull the left end of the filler cord to tighten it.
Thread the end through a darning needle, draw to the wrong
side of the fabric and cut.
* To cut the buttonhole opening, refer to the instructions on
page 70.
\\
\\\\\
J
73