Table of Contents
Advertisement
Back to Contents Page
Fans
Dell™ Studio XPS™ 9100 Service Manual
Removing the Chassis Fan
Replacing the Chassis Fan
Removing the Processor Fan and Heat Sink Assembly
Replacing the Processor Fan and Heat Sink Assembly
Removing the Front Fan
Replacing the Front Fan
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
WARNING:
Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)
removed.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
Removing the Chassis Fan
CAUTION:
Do not touch the fan blades when you are removing the chassis fan, as this could damage the fan.
1. Follow the instructions in
Before You
2. Remove the computer cover (see
3. Disconnect the chassis fan cable from the system board connector SYS_FAN (see
4. Remove the four screws that secure the chassis fan to the chassis.
5. Slide and lift the chassis fan away from the computer as shown in the illustration.
1 chassis fan 2 screws (4)
3 chassis fan cable
Replacing the Chassis Fan
1. Follow the instructions in
Before You
Begin.
Removing the Computer
Cover).
Begin.
System Board
Components).
Hide quick links:
Advertisement
Table of Contents
