Removing The Power Button Module; Replacing The Power Button Module - Dell Studio XPS 9100 Service Manual

Back to Contents Page
Power Button Module
Dell™ Studio XPS™ 9100 Service Manual
Removing the Power Button Module
Replacing the Power Button Module
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
WARNING: Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)
removed.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
Removing the Power Button Module
1. Follow the instructions in Before You
2. Remove the computer cover (see
3. Remove the front bezel (see
4. Remove the top cover (see
5. Remove the screw that secures the power button module to the top cover.
6. Press out the securing tab and pull the power button module away from the top cover.
1 screw 2 power button module
3 securing tab 4 top cover
7. Set the power button module aside in a secure location.
Replacing the Power Button Module
1. Follow the instructions in Before You
2. Align and push the power button module into the slot on the top cover.
Begin.
Removing the Computer Cover).
Removing the Front Bezel).
Removing the Top Cover).
Begin.