Replacing The Top Cover - Dell Studio XPS 9100 Service Manual

1 release tab 2
3 power button module
8. Remove the I/O panel (see
9. Remove the power button module (see
10. Set the top cover aside in a secure location.
Replacing the Top Cover
1. Follow the instructions in Before You
2. Replace the power button module (see
3. Replace the I/O panel (see
4. Connect the power button cable to the connector on the power button module.
5. Align the tabs in the top cover with the slots in the chassis.
6. Press and slide the top cover towards the back of the computer, until it clicks into place.
7. Connect the cables that you disconnected from the I/O panel.
8. Replace the two screws that secure the top cover to the chassis.
9. Replace the front bezel (see
10. Replace the computer cover (see
Back to Contents Page
power button cable
Removing the I/O Panel).
Removing the Power Button
Begin.
Replacing the Power Button
Replacing the I/O Panel).
Replacing the Front Bezel).
Replacing the Computer Cover).
Module).
Module).