CAUTION:
Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a
requirement for optimal processor operation.
3. Apply new thermal grease to the top of the processor.
4. Align the four captive screws on the processor fan and heat sink assembly with the screw holes on the system board.
5. Tighten the four captive screws that secure the processor fan and heat sink assembly to the system board.
6. Connect the processor fan cable to the system board connector CPU_FAN (see
7. Replace the computer cover (see
8. Connect your computer and devices to electrical outlets, and turn them on.
Removing the Front Fan
CAUTION:
Do not touch the fan blades when you are removing the front fan, as this could damage the fan.
1. Follow the instructions in
Before You
2. Remove the computer cover (see
3. Disconnect the front fan cable from the system board connector PWR_FAN (see
4. Press the tabs and pull the front fan towards the back of the computer.
5. Lift the fan out of the computer, and set it aside.
1 front fan 2 tabs (2)
3 front fan cable
Replacing the Front Fan
1. Follow the instructions in
Before You
2. Align the tabs on the front fan with the slots on the chassis.
Replacing the Computer
Cover).
Begin.
Removing the Computer
Cover).
Begin.
System Board
Components).
System Board
Components).