Installing A Hard Drive - Dell Dimension E520 Service Manual

Removing and Installing Parts: Dell Dimension E520 Service Manual
1 serial ATA data cable
4. Press in on the blue tabs on each side of the drive and slide the drive up and out of the computer.
1 tabs (2)
5. If removing this drive changes the drive configuration, then be sure to reflect these changes in system setup. When
you restart your computer, enter system setup (see
under SATA 0 through 5, set the SATA ports to the correct configuration.

Installing a Hard Drive

1. Follow the procedures in
2. Remove the computer cover (see
3. Check the documentation for the drive to verify that it is configured for your computer.
file:///T|/htdocs/systems/dimE520/en/SM_EN/parts.htm[10/16/2012 1:05:24 PM]
2 hard drive
Before You Begin.
Removing the Computer
2 power cable
System Setup), then go to the "Drives" section of the BIOS and
Cover).