Removing and Installing Parts: Dell Dimension E520 Service Manual
1
drive release latch
Installing a CD/DVD Drive
1. Follow the procedures in
2. Remove the computer cover (see
3. If you are installing a new drive, unpack the drive and prepare it for installation.
Check the documentation that accompanied the drive to verify that the drive is configured for your computer.
4. If you are installing a new drive, remove the drive panel insert (see
three shoulder screws from the inside of the drive-panel insert and attach the screws to the new drive.
5. Slide the drive into the drive bay until the drive clicks into position.
file:///T|/htdocs/systems/dimE520/en/SM_EN/parts.htm[10/16/2012 1:05:24 PM]
2
sliding plate
Before You
Begin.
Removing the Computer
3
CD/DVD drive
Cover).
Removing the Drive-Panel
Insert), then remove