Oki OKIFAX 1050 User Manual page 79

09 BUZZER VOLUME: This function sets the volume of the various beep and alarm tones your fax
machine emits during operations. Available settings are low, middle and high.
10 1ST PAPER SIZE: This function allows you to tell your fax machine what size of paper you are
using in your fax machines built-in paper cassette. Available settings are letter, legal, or A4.
Warning: If the correct paper size is not selected, a printing paper jam will occur.
11 This number is not currently assigned.
12 SELECT LANGUAGE: This function allows you to switch between the two languages
programmed into your fax machine.
13 SOFT RINGER SET: This function controls the telephone ringing sound your fax machine
makes when a call comes in. Available settings are on and off.
14 REMOTE RECEIVE: If you have an external telephone handset connected to your fax machine,
you can instruct your fax machine to begin receiving by entering a two-digit code on your
telephones keypad. Available settings/codes are off, 11, 22, 33, 44, 55, 66, 77, 88 and 99. This
feature is useful when you answer a call on the external telephone, but need to switch the line
over to your fax machine.
15 RING RESPONSE: This function controls how long your fax machine waits before answering an
incoming telephone call. The available settings are 1 ring, 5 seconds, 10 seconds, 15 seconds or
20 seconds.
16 MEM./FEED SWITCH: This function controls how your fax machine normally transmits fax
messages (by scanning the document into memory first, or by transmitting directly from the
document feeder). Available settings are memory and feeder.
17 ONE TOUCH PARAM: This function allows you to make changes to the communications
settings for a specific One Touch key, without changing the normal communication settings used
by your fax machine. For instructions on changing One Touch Parameters settings for a One
Touch key, see One Touch Parameters in the Dial Directories chapter (
OF1050 Users Guide(96-01-30)
).