Table of Contents
Advertisement
2 chrome hexnuts (rear I/O
panel)
To replace the system board:
1
Disconnect the AC adapter and modem and network cables and prepare
the convertible tablet PC by following the instructions in
convertible tablet PC" on page
2
Turn the convertible tablet PC over so the bottom is facing up.
3
Remove the battery by following the instructions in
battery" on page
4
Remove the hard drive kit by following the instructions in
hard drive kit" on page
5
Remove the optical drive by following the instructions in
optical drive" on page
6
Remove the memory modules from the memory bay by following the
instructions in
page
28.
7
Remove the battery by following the instructions in
battery" on page
8
Remove the four screws on the bottom that secure the hinge to the chassis
by following the instructions in
page
35.
9
Remove the thirteen screws on the bottom of the convertible tablet PC that
secure the palm rest assembly to the chassis by following the instructions
in
Step 5
of
"Replacing the palm rest assembly" on page
10
Remove the keyboard cover by following the instructions in
the keyboard cover" on page
11
Make sure that the convertible tablet PC is positioned so the top is facing
up.
3 chrome 2.5 × 5 mm
(top, system board)
6.
8.
10.
15.
"Adding or replacing memory in the memory bay" on
8.
Step 4
18.
www.gateway.com
Replacing the system board
"Preparing the
"Removing the
"Replacing the
"Replacing the
"Removing the
of
"Replacing the LED panel" on
44.
"Replacing
77
Advertisement
Table of Contents
