Table of Contents
Advertisement
7
Hold the new or replacement module at a 30-degree angle and press it into
the empty memory slot. This module is keyed so it can only be inserted
in one direction. If the module does not fit, make sure that the notch in
the module lines up with the tab in the memory bay.
Important
8
Gently push the module down until it clicks in place.
9
Replace the memory bay cover and tighten the cover screws.
10
Replace the keyboard cover and battery, connect the AC adapter and
modem and network cables, then turn on the convertible tablet PC.
Use only memory modules designed for the
Gateway M275.
www.gateway.com
Adding or replacing memory modules
31
Advertisement
Table of Contents
