Replacing The Led Panel - Gateway M275 Service Manual

Replacing the LED panel

Tools you need to complete this task:
Screws removed during this task:
2 chrome 2.5 × 6 mm
(keyboard cover)
To replace the LED panel:
1
Disconnect the AC adapter and modem and network cables and prepare
the convertible tablet PC by following the instructions in
convertible tablet PC" on page
2
Turn the convertible tablet PC over so the bottom is facing up.
3
Remove the battery by following the instructions in
battery" on page
4
Remove the keyboard cover by following the instructions in
the keyboard cover" on page
5
Make sure that the convertible tablet PC is positioned so the top is facing
up.
6
Open the keyboard compartment by following the instructions in
"Replacing the keyboard" on page
Flat-blade driver - OR -
Phillips #0 screwdriver
4 chrome 2.5 × 2.5 mm
(keyboard)
6.
8.
18.
22.
www.gateway.com
Replacing the LED panel
Scribe or non-marring tool
2 black 2.5 × 2.5 mm
(LED panel)
"Preparing the
"Removing the
"Replacing
35