Ricoh SP 311SFNw User Manual page 122

6. Sending and Receiving a Fax
1. Press the [Image Quality] key.
2. Press the [ ] or [ ] key to select the desired resolution setting, and then press the [OK]
key.
• Press the [Escape] key to discard the current change and return to the initial screen.
• You can change the machine's default [Resolution] setting to always scan with a specific resolution
level. For [Resolution], see page 140 "Fax Transmission Features Settings".
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Auto Reset Timer] while
the initial screen is displayed. For [System Auto Reset Timer], see page 166 "Administrator
Settings".
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
120
CVW108