Programming Table For Remote Controls - Avital MAXX2 Owner's Manual

Programming Table for Remote Controls

Feature
Arm/Disarm/Panic
Two Stage Unlock
Accessory(-) Output
for Boot Release
(disarmed only)
Silent Arm / Disarm
Accessory(-)
Output Timed
Accessory(-) Output
Pulsed / Latched
Remote Sensor
Bypass
All Channel Learn
Instant Code Deletion
NOTE: When assigning channels to different buttons than the factory
settings, you must "All Channel Learn" a transmitter and then change the
individual assignments with feature number 20 to 25 as required.
®2002 Directed Electronics, Inc.
Factory No. of
Setting Chirps
Button 20
Channel 1
Button 21
Channel 2
Button 22
Channel 3
Button 23
Channel 4
Button 24
+ Channel 5
Button 25
+ Channel 6
— 26
— 27
Secondary Action
Press any remote button(s). The
siren will chirp once for confirmation.
Press any remote button(s). The
siren will chirp twice for confirmation.
Press any remote button(s).The siren
will chirp three times for confirmation.
Press any remote button(s).The siren
will chirp four times for confirmation.
Press any remote button(s).The siren
will chirp five times for confirmation.
Press any remote button(s).The siren
will chirp 6 times for confirmation.
Press button. The siren will
chirp once to confirm factory preset
order.
Wait 3 seconds. The siren will chirp
twice. All remotes are erased from
memory.
27