Programming Table For Remote Controls - Avital Maxx 1 Owner's Manual

Programming Table for Remote Controls

Feature
Arm/Disarm/Panic
Two Stage Unlock
Accessory(-) Output
for Boot Release
(disarmed only)
Silent Arm / Disarm
Remote Sensor
Bypass
All Channel Learn
Instant Code Deletion
*Standard configuration if using the optional four-button remote control.
NOTE: When assigning channels to different buttons than the factory
settings, you must "All Channel Learn" a transmitter and then change the
individual assignments with feature number 20 to 25 as required.
®2002 Directed Electronics, Inc.
Factory No. of
Setting Chirps
Button 20
Channel 1
Button 21
Channel 2
Button* 22
Channel 3
Button 25
+ Channel 6
— 26
— 27
Secondary Action
Press any remote button(s). The
siren will chirp once for confirmation.
Press any remote button(s). The
siren will chirp twice for confirmation.
Press any remote button(s).The siren
will chirp three times for confirmation.
Press any remote button(s).The siren
will chirp 6 times for confirmation.
Press button. The siren will
chirp once to confirm factory preset
order.
Wait 3 seconds. The siren will chirp
twice. All remotes are erased from
memory.
27