Sony PDW-HR1 Operation Manual page 86

To add clips from the clip playback screen (quick
insertion)
This method allows you to decide the range to use and add
that range as a sub clip while viewing the video in the clip
playback screen. It does not use GUI screens. You can do
this during recording, playback (including pauses), and
searches.
1
Find the point that you want to make the start point of
the sub clip, and then press the ENTRY button with the
B button held down.
An In point is set and the IN button lights.
2
Find the point that you want to make the end point of
the sub clip, and then press the ENTRY button knob
with the b button held down.
An Out point is set and the OUT button lights. (This
determines the range of the sub clip to be added.)
To check the timecode of the In point or Out point
Press the B button or the b button.
To cue up the In point or Out point
Press the GOTO button with the
B button or b button held down.
To check the duration (time from In point to Out
point)
Press the B and b buttons at the same time.
To delete the In point or Out point
Press the DELETE button with the B or b button held
down.
To recall a deleted In point or Out point
Press the RECALL button with the IN button or OUT
button held down.
3
Press the S.SEL button.
A sub clip with the range specified in steps 1 and 2 is
added to the end of the clip list.
When you specify a range that spans several clips
Sub clips are generated for each of the clips in the
range.
To check the newly added sub clips
You can check the newly added sub clips by
displaying the clip list thumbnail screen.
4
Repeat steps 1 to 3 as required to add more sub clips.
5
Save the clip list (see page 88).
86
Scene Selection (Clip List Editing)
To reorder sub clips
See page 71 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, select the thumbnails
of the sub clips that you want to move (multiple
selections possible).
2
Display the Thumbnail Menu.
3
Select Move Sub Clips, and then press the PUSH SET
knob or the SET button.
The Clip List (Move) screen appears.
Clip List (Move)
TC 00:00:00:00 TC 00:00:21:27
TC 00:04:35:12 TC 00:04:57:10
TC 00:06:03:03 TC 00:06:25:00
08 AUG 2007 11:50
DATE&TIME
4
Move the I cursor to the point where you want to move
the selected thumbnails.
5
Press the PUSH SET knob or the SET button.
The sub clips are moved to the I cursor position.
6
Repeat steps 1 to 5 as required.
7
Save the clip list (see page 88).
To adjust the In and Out points of sub clips
(trim)
Proceed as follows to define the range of a scene by
changing the positions of the In and Out points.
See page 71 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, select a thumbnail.
2
Display the Thumbnail Menu.
3
Select Trim Sub Clip, and then press the PUSH SET
knob.
The Clip List (Trim) screen appears.
006 001/034
TC 00:04:06:00 TC 00:04:13:14
TC 00:05:19:08 TC 00:05:41:05
TC 00:06:46:27 TC 00:07:08:25
00:13:48:24
TOTAL DUR