Time Data; Disc Loaded Indication - Sony PDW-HR1 Operation Manual

4 Time data display area
1 Time data type
2 Repeat playback mode
3 NDF
4 VITC
8 Remaining recording capacity

9 Disc loaded indication

a Time data type
Displays the type of time data shown in the time data
display area. The type of time data is selected with CNTR
SEL on the HOME page of the function menu (see
page 50).
Display Type of time data
TC Timecode
COUNTER Elapsed recording/playback time
UB User bits
VITC VITC
VIUB VIUB
TCG Timecode generator value
UBG User bits generator value
b Repeat playback mode
This appears when setup menu item 142 REPEAT MODE
is set to "play".
c NDF
Lights when the displayed timecode is NDF (non-drop-
frame) timecode.
d VITC
Lights in the following cases.
• When VITC is being read in playback mode. (This has
no relation to the display in the time data display area.)
• When VITC recording is possible.
e EXT-LOCK
Lights when the timecode of the timecode generator is
synchronized with external timecode.
5 EXT-LOCK

6 Time data

7 Memory card loaded
indication and
remaining recording
capacity
f Time data
Normally displays timecode or VITC, according to the
selection made with TCR on page P3 TC of the function
menu.
g Memory card loaded indication and remaining
recording capacity
A memory card loaded indication and a remaining
recording capacity indication appear when the PDBK-
MK1 option board is installed in this unit and a memory
card is loaded in one of the memory card slots (A/B).
Display Card state
The memory card is writable.
/
The memory card is write protected.
/
h Remaining recording capacity
Displays the remaining recording capacity on the disc.
This indication flashes at a rate of 1 Hz when the
remaining capacity falls below two minutes, and flashes at
a rate of 4 Hz when the disc is full.
i Disc loaded indication
A disc loaded indication appears when a disc is loaded in
this unit.
The background color of the disc loaded indication
indicates the status of the disc, as follows.
Black: Recording and playback possible
Yellow: Playback only possible
Red: Recording and playback not possible
Note
Even when the background color is black, recording is not
possible in the following cases.
• The loaded disc is recording inhibited.
• REC INH in the HOME page of the function menu is set
to "ON".
29
Display Panel