During Playback - Sony PDW-HR1 Operation Manual

Alarm message in time
data display area
Verify ERR!
Recording
a) Displayed only when setup menu item 016 ALARM DISPLAY is set to
"on" or "limit".

During playback

Alarm message in time data
display area
a)
ILL. PLAY!
a)
MEM. Empty!
Disc Error!
a) Displayed only when setup menu item 016 ALARM DISPLAY is set to
"on" or "limit".
During thumbnail search, scene selection, and clip list operations
Alarm message in GUI
screen
CANNOT EXPAND CLIP
ANY FURTHER.
SELECTED ESSENCE
MARK DOES NOT EXIST.
SUB CLIP IS INVALID.SET
APPROPRIATE IN/OUT
POINTS.
DURATION OF ONE CLIP
LIST MUST BE LESS THAN
24 HOURS.
NO MORE SUB CLIPS CAN
BE ADDED TO THE CLIP
LIST.
SUB CLIP DOES NOT
EXIST.
CLIP LIST DOES NOT
EXIST.
MOVE IS INVALID.
CHAPTER DOES NOT
EXIST.
SOME ESSENCE MARK
CANNOT BE DELETED.
SOME ESSENCE MARK
CANNOT BE MOVED.
Alarm message in video monitor screen Description/action
DISC ERROR DETECTED.
NOW RECORDING ...
Alarm message in video monitor
screen
ILLEGAL PLAYBACK.
MEMORY EMPTY !!
DISC ERROR DETECTED.
Description/action
The clip cannot be expanded into more blocks.
This appears when the EXPAND button is pressed when the number of block is maximum, or
when the duration of an expanded thumbnail is 1 frame.
The selected essence mark does not exist.
This appears in the essence mark selection screen when the specified essence mark does not
exist on the disc.
The temporal relationship between the specified In and Out points in sub clip trimming is not
correct.
Reset so that the value of the Out point timecode is larger than the value of the In point
timecode.
The total duration of the current clip list is greater than 24 hours.
This appears when the total duration of the current clip list exceeds the upper limit of 24 hours
as the result of adding or trimming sub clips.
The upper limit of sub clips in the current clip list has been reached.
This appears when the upper limit of 300 clips in a clip list has been reached as the result of
adding or trimming sub clips.
There are no sub clips in the current clip list.
This appears when an attempt is made to move, trim or delete sub clips or preset timecode.
There are no clip lists on the disc.
This appears when an attempt is made to execute a Delete Clip List operation when there are
no clip lists on the disc.
The sub clip cannot be moved.
This appear when an attempt is made to execute a Move Sub Clips operation when there are no
sub clip in the current clip list, or when there is only one sub clip.
The specified chapter has not been recorded.
This appears when an attempt is made to display a chapter when a chapter has not been
recorded for that clip.
The Rec Start essence mark cannot be deleted.
This appears when an attempt is made to delete a Rec Start with a Delete Shot Mark operation.
Delete Shot Mark can delete only Shot Mark1 and Shot Mark2 marks.
Rec Start essence mark cannot be moved.
This appears when an attempt is made to move a Rec Start with a Move Shot Mark operation.
Move Shot Mark can move only Shot Mark1 and Shot Mark2 marks.
This appears when an error is found in the signal
recorded on the disc while performing the recording
verification function. Change the disc.
Wait for recording to finish.
Description/action
Check the disc being played by this unit.
Check the disc being played by this unit.
Use another disc.
175
Troubleshooting