Sony PDW-HR1 Operation Manual page 173

Alarm message in time Alarm message in video monitor screen Description/action
data display area
b) TC EXTERNAL IS SELECTED.
TC EXT!
SET TC INTERNAL MODE IN TIME DATA
SETTING AREA.
a) TCG REGEN MODE IS SELECTED.
REGEN mode!
SET TC PRESET MODE IN TIME DATA
SETTING AREA.
a) TCG RUN MODE IS SET TO REC RUN.
REC RUN!
SET TC FREE RUN MODE IN TIME DATA
SETTING AREA.
b) THUMBNAIL(S) CANNOT BE DISPLAYED
REC mode!
DURING RECORDING.
CANNOT EXECUTE IN REC MODE.
DRIVE MAINTENANCE MENU CANNOT
BE EXECUTED WHILE IN REC MODE.
INPUT SELECTION CANNOT BE
CHANGED DURING RECORDING.
AUDIO REC MODE CANNOT BE
CHANGED DURING RECORDING.
REC-PAUSE! TC/UB CANNOT BE PRESET IN REC-
PAUSE MODE.
CLIP LIST IS NOT SELECTED.
b)
No SEL List
b) TO ADD AN ESSENCE MARK, EXIT
SB CLP mode
FROM SUB CLIP MODE FIRST.
b) SUB CLIP IS INVALID.
SUB CLIP NG
SET APPROPRIATE IN/OUT POINTS.
b) NO CLIP LIST.
No List!
Loading List! LOADING CLIP LIST.
b) STOP ONCE, THEN EXECUTE.
STOP ONCE!
No EM space ESSENCE MARK NOT RECORDED.
NO SPACE AVAILABLE TO RECORD
ESSENCE MARK.
EM Full! NO MORE ESSENCE MARKS CAN BE
RECORDED.
Disc Damage DISC CANNOT BE RECORDED TO.
USE ANOTHER DISC FOR RECORDING.
This appears when the INT/EXT/SDI switch is set to
"EXT", and you try to preset timecode or user bits by
setting the PRESET/REGEN switch to "PRESET".
Set the INT/EXT/SDI switch to "INT" (see page 16).
This appears when the PRESET/REGEN switch is
set to "REGEN TC" or "REGEN VITC", and you try to
preset timecode or user bits.
Set the PRESET/REGEN switch to "PRESET" (see
page 16).
This appears when the F-RUN/R-RUN switch is set to
"R-RUN", and you try to preset timecode or user bits.
Set the F-RUN/R-RUN switch to "F-RUN" (see
page 16).
Stop recording and try again.
Stop recording and try again.
This appears when you press the SUB CLIP/
DISC MENU button while the clip list on the disc is
not loaded into the current clip list.
Load the clip list (see page 84) and try again.
This appears when an attempt is made to manipulate
the essence mark while the SUB CLIP/DISC MENU
button is lit or to set a clip flag while the clip list is
being played back (SUB CLIP indicator is lit). Perform
the operation after pressing the SUB CLIP/DISC
MENU button to turn it off.
Set the In and Out points again.
This appears when you try to delete a clip list when
there is no clip list saved on the disc.
Load the disc that contains the clip list you want to
delete.
This appears if the SUB CLIP/DISC MENU button is
pressed while a clip list is loading.Wait for the clip list
to finish loading and try again.
This appears when the SUB CLIP/DISC MENU
button is pressed while the clip list is being played
back or when an attempt is made to open the GUI
screen with setup menu item 151 GUI OPERATION
set to "stop". Perform the operation after stopping
playback.
Delete unneeded shot marks in the chapter thumbnail
screen.
Use another disc.
173
Troubleshooting