Figure 2-7 Xsb Configuration Diagram (Quad-Xsb) (In The High-End Systems) - Fujitsu SPARC Enterprise M4000 User Manual

XSB Configuration Diagram (Quad-XSB) (In the High-End Systems)
FIGURE 2-7
When PSB#n is Quad-XSB type
CMU#n
Domain Configuration Procedure and Reference Sources
The steps from making domain configuration settings to activating a domain are
shown below. Each step contains a reference to where you can find additional
information.
1. Log in to XSCF.
2. Make memory mirror mode and Uni/Quad-XSB settings for each PSB. (Note)
(See showfru (8), setupfru (8), and
Configuration" on page
3. Create the DCL information corresponding to a domain, LSB, and XSB. (See
showdcl (8), setdcl (8).)
4. Assign an XSB to the domain, according to the created DCL information. (See
addboard (8), showboard (8). )
5. Turn on the power to the domain.
Note – Make these settings only to change the number of XSB divisions and the
mirror mode.
Memory
Memory
Memory
Memory
2-113.)
IOU#n
XSB#xx-0
I/O device
XSB#xx-1
I/O device
XSB#xx-2
I/O device
XSB#xx-3
I/O device
Section 2.2.12, "System Board
Chapter 2 Setting Up XSCF 2-99