Table 2-22 Dcl Information - Fujitsu SPARC Enterprise M4000 User Manual

Note – The PSB number is same as the CMU / I/O unit slot number.
Note – If a PSB has one XSB number, the Uni-XSB configuration is assumed; and if
it has four XSB numbers, the Quad-XSB configuration is assumed.
TABLE 2-22
of LSB information. Up to 16 items of LSB information (on the DCL) can be set for
one domain. These items can be displayed and specified by showdcl (8), and
setdcl (8). For details on DCL terms, see
DCL Information
TABLE 2-22
DCL Item
Domain ID
LSB number
XSB number
no-mem (Omit-
memory option)
no-io (Omit-I/O
option)
Floating Board
Configuration policy
Domain status
lists DCL information. The DCL has descriptors that each specify one item
Setting Details and Notes
Local domain number.
LSB number.
XSB number assigned to an LSB.
The same XSB number cannot be assigned to another LSB in the same domain. (Note)
True : Memory cannot be used.
False : Memory can be used (default).
True : Does not add I/O.
False : Adds I/O (default).
True : Selects a Floating Board.
False : Does not select a Floating Board (default).
FRU : Removal in units of FRU components. (Default) (Note)
XSB : Removal in XSB units
System : Removal of a domain (domain deactivated)
Display domain status as follows.
Powered Off: Power off state.
Initialization Phase: State that POST is proceeding or initializing is started by
OpenBoot PROM.
OpenBoot Executing Completed: State that initializing is completed by OpenBoot
PROM
Booting/OpenBoot PROM prompt: The OS is booting. Or due to the domain shutdown
or reset, the system is in the OpenBoot PROM running state, or is suspended in the
OpenBoot PROM (ok prompt) state.
Running: State that OS is running.
Shutdown Started: State that the power off is started.
Panic State: State that panic is occurred and reset is not started.
.
TABLE 2-19
Chapter 2 Setting Up XSCF 2-91