Setting Snmpv3 Trap - Fujitsu SPARC Enterprise M4000 User Manual

Setting SNMPv3 Trap

■
1. Use the showsnmp (8) command to display SNMP settings.
<Example>
SNMPv1 and SNMPv2c
XSCF> showsnmp
Agent Status:
Agent Port:
System Location:
System Contact:
System Description: DataBaseServer
Trap Hosts:
Hostname
--------
host1
host2
SNMP V1/V2c:
Status: Enabled
Community String: public
2. Use the setsnmp (8) command to make SNMPv3 trap settings.
<Example>
algorithm, authentication and encryption passwords, and the host
name of the trap destination
XSCF> setsnmp addv3traphost -u yyyyy -n 0x### -r SHA host3
Authentication Password: *****
Encryption Password: xxxxxxxx
2-78 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
Command operation
Display of the status when settings have been made for
Enabled
161
MainTower21F
foo@example.com
Port Type
---- ----
162 v1
1162 v2
Specify a user name, an engine ID, an authentication
Community String
----------------
public
public
Username Auth Protocol
-------- --------------
n/a n/a
n/a n/a