Fujitsu SPARC Enterprise M4000 User Manual page 239

XSCF Commands (Continued)
TABLE 5-1
Command
setdate
showdate
setntp
showntp
resetdateoffset
setssh
showssh
settelnet
showtelnet
setautologout
showautologout
setsmtp
showsmtp
setemailreport
showemailreport
setlookup
showlookup
setldap
showldap
sethttps
showhttps
setupplatform
Description
Sets the XSCF time.
Displays the XSCF time.
Configures the NTP server.
Displays the SSH settings and fingerprint.
Resets the time subtraction between the XSCF and the domain.
Configures SSH. Generates RSA and DSA keys for SSH2 host authentication.
Displays the SSH settings and fingerprint.
Configures telnet.
Displays the telnet settings.
Sets the session timeout time of the XSCF shell.
Displays the session timeout time of the XSCF shell.
Configures the SMTP server.
Displays the the SMTP server settings.
Configures mail notification.
Displays the mail notification settings.
Enables or disables the use of an LDAP server for authentication and user privilege
lookup.
Displays information about whether an LDAP server is used for authentication and
user privilege lookup.
Configures LDAP client settings.
Displays LDAP client settings.
Configures the https settings.
Displays the https settings.
• Sets up platform-specific settings.
Note: In the platform-specific settings, the following items can be optionally
configured. Each item is the same as the setting of
• User Account settings
• XSCF Network Settings
• Internal DSCP Network
• Domain Name Service
• Network Time Protocol
• SSH
• HTTPS Server
• Email Reports
Chapter 2.
Chapter 5 Overview of the XSCF Shell 5-3