Ssh/Telnet Administration; Table 2-8 Ssh/Telnet Administration Terms - Fujitsu SPARC Enterprise M4000 User Manual

5. Use the poweron (8) command to turn on power to all domains.
XSCF> poweron -a
DomainIDs to power on:00,01,02,03
Continue? [y|n] :y
00 :Powering on
01 :Powering on
02 :Powering on
03 :Powering on
*Note*
This command only issues the instruction to power-on.
The result of the instruction can be checked by the "showlogs
power".
XSCF>
6. Use the Solaris OS date (1M) command to display the domain time and use
the showdate (8) command to display the XSCF time. Then confirm that the
domain time is the same as the XSCF time.
2.2.5

SSH/Telnet Administration

The SSH/telnet administration settings are used to specify the SSH and telnet
settings required to use the XSCF Shell terminal or domain console with an XSCF-
LAN connection. For the server, specify enable/disable for each of SSH and telnet
setting, including the SSH host key and the automatic timeout period after login.
Also, install an SSH user public key to XSCF.
TABLE 2-8
TABLE 2-8
Term
RW console
RO console
2-48 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
lists terms used in SSH/telnet Administration.
SSH/Telnet Administration Terms
Description
RW (Read and Write). This is a write-enabled OS console (domain console).
RO (Read Only). This is a read-only OS console