Fujitsu SPARC Enterprise M4000 User Manual page 330

2. Use the message ID for accessing the specified URL to acquire detailed
information corresponding to this problem. For the specified URL, see the web
site information about the messages described in
For the message ID, the following information can be confirmed at the web site.
Message type (Type)
■
Fault level (Severity)
■
Outline of fault (Description)
■
Machine operation after the fault (Automated response)
■
Influence (Impact)
■
Action to be taken (Action)
■
Detailed information (Details)
■
3. Repair the fault according to the recommended processing.
For details of the showlogs (8) command, see the XSCF Reference Manual or the man
page.
Using the fmdump (8) Command to Confirm a Fault
1. Perform the fmdump (8) command on the XSCF Shell and reference the log.
XSCF> fmdump
TIME
Dec 28 13:01:27.3919
Dec 28 13:01:49.3765
Dec 28 13:02:59.4448
:
(The layout of the command example is subject to change without previous
notice for functional improvement.)
In the example above, the following items are displayed:
Time at which the problem was registered in the log (TIME).
■
Universal Unique Identifier that can be used to uniquely identify the problem in
■
an optional system set (UUID)
Message ID (MSG-ID) that can be used to access the corresponding description of
■
information at the specified site
2. Use the message ID for accessing the specified URL to acquire detailed
information corresponding to this problem. For the specified URL, see the site
information about the messages described in the
information that can be referenced for the message ID is the same as that
described in the item of showlogs (8) error.
B-4 SPARC Enterprise Mx000 Servers XSCF User's Guide • April 2008
UUID
bf36f0ea-9e47-42b5-fc6f-c0d979c4c8f4
3a186292-3402-40ff-b5ae-810601be337d
58107381-1985-48a4-b56f-91d8a617ad83
"Preface" on page xix.
MSG-ID
FMD-8000-11
FMD-8000-11
FMD-8000-OW
"Preface" on page xix. The