Securing The Server - Fujitsu SPARC ENTERPRISE M4000 Service Manual

6.1.12

Securing the Server

Caution – The motherboard unit is heavy. Two people are recommended to lift the
unit.
1. Install the motherboard unit.
This step includes installing the motherboard cradle, securing the busbar screws,
and installing the CPU modules and filler panels See
Enterprise M5000 Motherboard Unit" on page
2. Install the top cover.
This step includes sliding the server in to the equipment rack and restoring the
rack antitilt features to their original position. See
page
3. Power the server on.
This step includes reconnecting power cables, verifying the state of the LEDs,
and turning the keyswitch to the Locked position. See
Using Software" on page
Note – If the Solaris automatic booting is set, use the sendbreak -d domain_id
command after the display console banner is displayed but before the system starts
booting the operating system to get the ok prompt.
4. Confirm the hardware.
This step includes running programs to be certain all components are mounted
again and then booting the operating system.
Refer to
5-8.
4-13.
"Verifying Hardware Operation" on page 4-9
"Installing the SPARC
13-10.
"Replacing the Top Cover" on
"Powering the Server On
for more information.
Chapter 6 Storage Devices Replacement 6-11