Fujitsu SPARC ENTERPRISE M4000 Service Manual page 222

7. Collect an XSCF snapshot to archive system status prior to upgrade.
If a problem should occur during the upgrade procedure, a snapshot of the
system status might be helpful.
XSCF> snapshot -t user@host:directory
8. Update the XCP version.
For instructions for updating the firmware, refer to the Sun SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide.
9. Log in to the XSCF again, using an account with platadm or fieldeng
privileges.
10. Power on all the domains, and apply OpenBoot PROM firmware.
XSCF> poweron -a
The ok prompt is displayed. You do not need to start the Solaris OS.
11. Check the updated OpenBoot PROM version.
XSCF> version -c cmu -v
The following example shows output for XCP 1081, in which the version of
OpenBoot PROM is 02.08.0000:
XSCF> version -c cmu -v
DomainID
DomainID
DomainID
DomainID
XSB#00-0:
XSB#00-1:
XSB#00-2:
XSB#00-3:
XSB#01-0:
XSB#01-1:
XSB#01-2:
XSB#01-3:
...
12. Turn off the power to all the domains.
XSCF> poweroff -a
12-12 SPARC Enterprise M4000/M5000 Servers Service Manual • August 2009
0: 02.08.0000
1: 02.08.0000
2: 02.08.0000
3: 02.08.0000
02.08.0000(Current)
02.08.0000(Current)
02.08.0000(Current)
02.08.0000(Current)
02.08.0000(Current)
02.08.0000(Current)
02.08.0000(Current)
02.08.0000(Current)
02.03.0000(Reserve)
02.03.0000(Reserve)
02.03.0000(Reserve)
02.03.0000(Reserve)
02.03.0000(Reserve)
02.03.0000(Reserve)
02.03.0000(Reserve)
02.03.0000(Reserve)