Playback; Settings For Playback - Sony HVR-1500A Operating Instructions Manual

Reference level for recording in DV (SP) format
On many consumer DV devices, recording is carried out at
a reference level of –12 dB. Therefore, the reference level
for recording in DV (SP) format is fixed at –12 dB on this
unit. When dubbing DVCAM source material recorded at
a different reference level, it is recommended that you
carry out manual level adjustments as follows.
Player (DSR-
1800A/1800AP/
1600A/1600AP/
1500A/1500AP) in
E-E mode
Audio input i.LINK/SDI
selection: INT
SG/1 kHz
REC mode: 2ch or
4ch depending on
DVCAM source
Reference level:
Reference level of
the DVCAM
source
a)
VAR switch :
PRESET
a) DSR-1500A/1500AP only
46

Playback

Recorder (HVR-1500A)
in E-E mode
REC FORMAT: DV (SP)
VARIABLE switch: REC
For each channel,
observing the audio
level meter, adjust the
audio level to –12 dB
with the REC/PB
LEVEL control knobs.
Playback
This section describes the settings and operations
necessary to perform playback on this unit.
For details of connections and settings when using this
unit as part of an editing system, see Chapter 5,
"Connections and Settings for Editing" (page 57).
For details of use for dubbing through the i.LINK
interface, see Chapter 6, "Using the i.LINK Connector for
Dubbing and TC Insert" (page 66).

Settings for playback

2
HVR-1500A (this unit as player)
POWER
1
INPUT SELECT
HD VIDEO SD VIDEO CH1 1/2 CH2 3/4
OVER
REC/PB LEVEL
1 2 3 4
CH
MONITOR
LEVEL VARIABLE
SELECT
REC
PRESET
PB
PHONES CONTROL-S
REW
1
Power on this unit by pressing on the " " side of the
POWER switch.
2
Power on the video monitor and set its switches as
shown below.
Switch
75 Ω termination switch
Video monitor
EJECT
LOCAL
9PIN
i.LINK
OVER
REPEAT 1080 525
HDV DVCAM
0
(DV)
-12
DISPLAY MENU ASSIGN RESET(NO)
-20
-30
-40
-60
TC
1 2 TC VITC 44.1K
CH
COUNTER PRESET SET(YES)
01:23:45:15
EDIT MODE SELECT
REC INHI
PLAY F FWD STOP REC
A B
Setting
ON (or attach a 75 Ω
terminator.)