Displaying The Time Data And Operating Mode; Displaying On The Lcd Monitor And An External Video Monitor - Sony HVR-1500A Operating Instructions Manual

Displaying the Time Data
and Operating Mode
You can display time data and the operating mode on the
monitor screen.
You can also display the desired time data in the time
counter display of the LCD monitor.
Displaying on the LCD monitor and
an external video monitor
1
In the DISPLAY INFO menu item (see page 78), set
the time data display mode.
Display mode
TIME DATA &
STATUS
TIME DATA & UB
TIME DATA & CNT
TIME DATA & TIME
TIME DATA ONLY
REC DATE & TIME
2
With the TC SELECT menu item (see page 80), select
the type of timecode when displaying timecode or user
bit data.
Setting Data displayed
TC LTC timecode value or user bit data
VITC VITC timecode value or user bit data
Note
When the internal timecode generator of this unit
operates in external regeneration mode (see page 54),
the setting in step 2 also determines the target
timecode for synchronization of the internal timecode
generator.
3
Set the CHARA. DISPLAY menu item (see page 77)
to ON (factory default setting is ON).
Information displayed
Time data and the operating
mode of this unit
Time data selected with the
COUNTER SELECT button and
user bit data. However, when
the user bit display is selected,
user bit data and timecode.
Time data selected with the
COUNTER SELECT button and
CNT. However, when the CNT
display is selected, CNT and
timecode.
TC and VITC
Only time data selected with the
COUNTER SELECT button.
REC DATE (recording date) and
REC TIME (recording time)
recorded on the tape.
The set items are displayed on the monitor screen.
You can set the display content of the superimposed
text information, the type and positioning of the
characters in the DISPLAY CONTROL menu item
(see page 77).
When the SUB STATUS menu item (see page 78) is
set to anything other than OFF, you can display the
supplementary status information relating to the
editing mode and timecode generator.
For details of the contents of the text information, see
"Superimposed Text Information" (page 29).
For details of supplementary status information, see
"Displaying Supplementary Status Information" (page
30).
To change the time data display
Time data type indicator
POWER
INPUT SELECT
SD VIDEO CH1 1/2 CH2 3/4
HD VIDEO
OVER OVER
0
REC/PB LEVEL
-12
1 2 3 4
-20
-30
-40
-60
1 2
CH CH
MONITOR
LEVEL VARIABLE
EDIT MODE
SELECT
REPEAT
REC
PRESET
PB
PHONES CONTROL-S
REW PLAY
Time counter display
1
Press the DISPLAY button to set the LCD monitor
display to status display mode or small screen display
mode (see page 16).
2
Press the COUNTER SELECT button.
Each press of the button changes the time data type
indicator in the following way.

Displaying the Time Data and Operating Mode

EJECT
LOCAL
9PIN
i.LINK
60i 720 30p 720 60p
HDV DVCAM
(DV)
DISPLAY MENU ASSIGN RESET(NO)
TC
TC VITC 48K
COUNTER PRESET SET(YES)
01:23:45:15
SELECT
F FWD STOP REC
A B
2 1
33