Menu Contents; Setup Menu - Sony HVR-1500A Operating Instructions Manual

Menu Contents

Setup menu

The purpose and settings of the setup menu items are
described below.
Indications of menu items and settings
In the table below entitled "Menu contents", the indication
of each menu item or setting on the monitor screen is
shown first, then the indication of the same item or setting
in the time counter display of this unit is shown in square
brackets ([ ]).
Menu contents
OPERATIONAL FUNCTION [Operational]: Operation
settings
REPEAT FUNCTION [> REP
FUNC]: Make settings for
repeat playback mode.
REPEAT MODE [>>
REPEAT MD]:
Determine whether or not
to put the unit into repeat
playback mode.
REPEAT TOP [>> REP
TOP]: Determine
whether the repeat start
point is the beginning of
tape or point A.
REPEAT END [>> REP
END]: Determine
whether the repeat end
point is the end of the
video recorded portion,
the end of tape, or point
B.
A PRESET [>> A preset]:
Specify a timecode value
to be used as the setting
of point A.
B PRESET [>> B preset]:
Specify a timecode value
to be used as the setting
of point B.
Examples:
Indication on monitor
screen
OPERATIONAL FUNCTION [Operational]
CASSETTE OUT
*EE
• Settings preceded by an asterisk (such as *EE) are
factory default settings.
• In the time counter display, one to three ">" symbols
may precede item or setting indications depending on the
current menu level. Larger numbers of ">" symbols
indicate lower menu levels.
Description of settings
*OFF [>>> OFF]: Do not put the unit into repeat playback
mode.
ON [>>> ON]: Put the unit into repeat playback mode.
ON (FREEZE) [>>> FREEZE]: Put the unit into freeze playback
mode. (In this case, while the unit is cueing up to the
repeat start point, the freeze picture of the repeat end point
is displayed.)
*TAPE TOP [>>> Tape top]: The repeat start point is the
beginning of tape.
A POINT [>>> A point]: The repeat start point is point A as set
by the user.
*VIDEO END [>>> VD end]: The repeat end point is the end of
the video recorded portion.
TAPE END [>>> Tape end]: The repeat end point is the end of
tape.
B POINT [>>> B point]: The repeat end point is point B as set
by the user.
For details, see "Setting points A and B for repeat playback"
(page 49).
For details, see "Setting points A and B for repeat playback"
(page 49).
Indication in time counter
display
[>> Cass. out]
[>>> EE]
Menu Contents
75