Drive; Operation; Conveyance Control; Media Exit Full Detection Control - Konica Minolta magicolor 1690MF Service Manual

18. Media exit section

18.2 Drive

18.3 Operation

18.3.1

Conveyance control

A. Reverse/paper exit switch control
• The exit roller is driven by the transport motor.
• During 1-sided printing, the exit roller rotates in the forward direction and feeds the media
transported from the fusing section out onto the media exit tray.
• If the machine is mounted with an optional Duplex unit, the exit roller is driven by the
transport motor of the Duplex unit.
• The exit roller is rotated in the forward or backward direction by the transport motor of the
Duplex unit to convey the media into the Duplex unit.
18.3.2

Media exit full detection control

• The exit sensor detects a full condition of the media exit tray.
• If the exit sensor is not blocked within a predetermined period of time after it has been
unblocked, the machine detects a media exit full condition and displays the correspond-
ing message on the control panel.
70
Theory of Operation Ver. 1.0 Nov. 2008
Exit roller
Transport motor
A0HFT2C510AA