Basic copying
Making copies
This section describes the often-used basic procedure for making copies.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
•If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Copy Ready"
screen is displayed.
•Set the document type, as necessary. For details, see
3
Enter the number of copies using the numeric keys.
You can set 1 to 99 copies.
4
Press <Start>.
•To cancel copying, press <Stop>.
•When all the documents are scanned and "Copy Reserve Ready" is displayed, you can load
the next document and start scanning.
"Setting the document type" (page
Basic copying
1
1-7).
1-3