Selecting A Usb Cable; Selecting A Lan Cable; Connecting The Interface Cable - Fujitsu DL3750+/3850+ User Manual

SETTING UP
2-20

Selecting a USB Cable

When the USB interface is used to connect to the host computer, the
parallel interface and the serial interface (factory add-on option) cannot
be connected simultaneously.
The USB interface does not guarantee all connections of USB-
supported devices.

Selecting a LAN cable

When the LAN cable is connected, the parallel and USB cables cannot
be used.
The LAN cable, when used in 100BASE-TX environments, must
conform to category 5 or higher.

Connecting the Interface Cable

To connect the interface cable:
1. Turn off both the printer and the computer.
2. Pull the shutter on the left side of the printer upward as far as it will go.
Shutter
NOTE
Removing and Attaching the Shutter
When use of the shutter is not required, remove it by using the following
procedure.
Opening the shutter
User's Manual