Fujitsu DL3750+/3850+ User Manual page 102

USING SETUP MODE
5-24
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and Epson
ESC/P2 emulations. The notes are defined at the end of the table.
MENU1 and
Options
MENU2 Items
<CHR-SET> SET 1
SET 2
(*3)
ITALIC
GRAPHIC
<PRF-SKP>
SKIP
NO-SKIP
<WIDTH> 13.6 IN
(*5) 11.4 IN
11.0 IN
8.0 IN
<ZEROFNT>
(*2)
NO-SLSH
SLASH
Description
IBM character set 1
IBM character set 2
If a downloaded (soft) font is used, the
character set for that font overrides the
<CHR-SET> setting.
Italic characters are available.
Graphics characters (ruled lines) are
available.
For continuous forms, this option
specifies whether an inch is skipped
around the perforation. If you are not
using software to specify a bottom
margin, select SKIP when using thicker,
multipart forms.
One inch is skipped around the perfora-
tion.
The perforation is not skipped. Printing
continues in the bottom margin of the
page.
13.6-inch page width
11.4-inch page width
11-inch page width
8-inch page width
Specifies whether to print the number
zero with a slash. This is useful to
distinguish the capital letter "O"
from the number "0".
Invalid for some soft fonts.
0
0 /
User's Manual