Fujitsu DL3750+/3850+ User Manual page 111

User's Manual
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE Options
Items
<BAUD-RT> 150
300
600
1200
2400
4800
9600
19200
<PROTOCL>
XON/XOF
DTR
REV-CHL
<DSR> IGNORE
DETECT
<DUPLEX> FULL
HALF
<CTS> IGNORE
DETECT
<CD> IGNORE
DETECT
<==END==>
USING SETUP MODE
Description
The baud rate is in bps (bits per
second). Select the same baud rate as
used by your computer or modem.
Indicates data transmission protocol.
The DC1 and DC3 codes are used.
The Data Terminal Ready signal is used.
The Reverse Channel signal is used.
DSR is ignored by the printer.
DSR is detected by the printer.
Simultaneous data transmission occurs in
opposite directions.
Data transmission occurs in either
direction, but not simultaneously.
CTS is ignored by the printer.
CTS is detected by the printer.
CD is ignored by the printer.
CD is detected by the printer.
Indicates the end of the HARDWRE
item list. Press the MENU button to print the
first item, which is <PPR-OUT>. Press the
TEAR OFF button to print the previous item.
Press the ONLINE button to reprint the
<<FUNCTION>> menu.
5-33